Main performance index 1. Oscilloscope Divided into two models: 2 analog channels and 4 analog channels 1 GHz, 500 MHz, 350 MHz, 200 MHz, and 100 MHz bandwidth models Scalable bandwidth (up to 1 GHz) Up to 5 GS/s sampling rate 10 M record length on all channels >280,000 wfm/s maximum waveform capture rate Standard passive voltage probe, 3.9 pF capacitive load, 1 GHz, 500 MHz or 250 MHz analog bandwidth 2. Spectrum analyzer Frequency Range Standard configuration: 9 kHz-oscilloscope bandwidth Optional: 9 kHz-3 GHz Ultra-high capture bandwidth, up to 3 GHz 3. Arbitrary function generator (optional) 13 pre-defined waveform types 50 MHz waveform generation function 128 k arbitrary waveform generator record length 250 MS/s arbitrary waveform generator sampling rate 4. Logic analyzer (optional) 16 digital channels 10 M record length on all channels 121.2 ps timing resolution 5. Protocol analyzer (optional) Supports serial buses such as I2C, SPI, RS-232/422/485/UART, USB 2.0, CAN, CAN FD, LIN, FlexRay, MIL-STD-1553, ARINC-429 and audio standards Digital voltmeter/frequency counter (provided free of charge after product registration) 4-digit AC RMS, DC and AC+DC RMS voltage measurement 5-digit frequency measurement 1-Oscilloscope MDO3012 MDO3014 MDO3022 MDO3024 MDO3032 MDO3034 MDO3052 MDO3054 MDO3102 MDO3104 Analog channel 2 4 2 4 2 4 2 4 2 4 Analog channel bandwidth 100 MHz 100 MHz 200 MHz 200 MHz 350 MHz 350 MHz 500 MHz 500 MHz 1 GHz 1 GHz Rise time (typical calculated value) (10 mV/div setting, 50 Ω input terminal) 4 ns 4 ns 2 ns 2 ns 1.14 ns 1.14 ns 800 ps 800 ps 400 ps 400 ps Sampling rate (1 channel) 2.5 GS/s 2.5 GS/s 2.5 GS/s 2.5 GS/s 2.5 GS/s 2.5 GS/s 2.5 GS/s 2.5 GS/s 5 GS/s 5 GS/s Sampling rate (2 channels) 2.5 GS/s 2.5 GS/s 2.5 GS/s 2.5 GS/s 2.5 GS/s 2.5 GS/s 2.5 GS/s 2.5 GS/s 5 GS/s 5 GS/s Sampling rate (4 channels)-2.5 GS/s-2.5 GS/s-2.5 GS/s-2.5 GS/s-2.5 GS/s Record length (1 channel) 10 M 10 M 10 M 10 M 10 M 10 M 10 M 10 M 10 M 10 M Record length (2 channels) 10 M 10 M 10 M 10 M 10 M 10 M 10 M 10 M 10 M 10 M 10 M Record length (4 channels)-10 M-10 M-10 M-10 M-10 M Digital channel with MDO3MSO option 16 16 16 16 16 16 16 16 16 16 Arbitrary function generator output with MDO3AFG option 1 1 1 1 1 1 1 1 1 1 Spectrum analyzer channel 1 1 1 1 1 1 1 1 1 1 Standard frequency range of spectrum analyzer 9 kHz-100 MHz 9 kHz-100 MHz 9 kHz-200 MHz 9 kHz-200 MHz 9 kHz-350 MHz 9 kHz-350 MHz 9 kHz-500 MHz 9 kHz-500 MHz 9 kHz- 1 GHz 9 kHz-1 GHz Selectable frequency range of spectrum analyzer with MDO3SA option 9 kHz-3 GHz 9 kHz-3 GHz 9 kHz-3 GHz 9 kHz-3 GHz 9 kHz-3 GHz 9 kHz-3 GHz 9 kHz-3 GHz 9 kHz-3 GHz 9 kHz-3 GHz 9 kHz-3 GHz Vertical system, analog channel Hardware bandwidth limit ≥350 MHz model 20 MHz or 250 MHz 100 MHz and 200 MHz model 20 MHz Input coupling AC, DC Input impedance 1 MΩ ±1%, 50 Ω ±1%, 75 Ω ±1%; 75 Ω is not applicable to 1 GHz models Input sensitivity range 1 MΩ 1 mV/div to 10 V/div 50 Ω, 75 Ω 1 mV/div to 1 V/div Vertical resolution 8 bits (11 bits at high resolution) Maximum input voltage 1 MΩ 300 VRMS CAT II, ??peak value ≤ ±425 V 50 Ω, 75 Ω 5 VRMS, peak value ≤ ±20 V DC gain accuracy of 5 mV/div and above is ±1.5%, when it is higher than 30 °C, it will be derated by 0.10%/°C 2 mV/div is ±2.0%, derating by 0.10%/°C above 30 °C 1 mV/div is ±2.5%, derating at 0.10%/°C above 30 °C Variable gain is ±3.0%, derating at 0.10%/°C above 30 °C Isolation between channels (typical value) The same vertical scale for any two channels ≥100:1 (≤100 MHz), ≥30:1 (>100 MHz to rated bandwidth) Random noise (typical value) Vertical scale setting 50 Ω, RMS MDO310x MDO305x MDO303x MDO302x MDO301x 1 mV/div 0.179 mV 0.178 mV 0.169 mV 0.178 mV 0.161 mV 100 mV/div 2.4 mV 2.05 mV 1.97 mV 1.93 mV 1.87 mV 1 V/div 24.67 mV 20.96 mV 20.01 mV 19.39 mV 18.55 mV Offset range Volt/div setting Offset range 1 M Ω input 50 Ω, 75 Ω input 1 mV/div to 50mV/div ±1 V ±1 V 50.5 mV/div to 99.5 mV/div ±0.5 V ±0.5 V 100 mV/div to 500 mV/div ±10 V ±10 V 505 mV/div to 995 mV/div ±5 V ±5 V 1 V/div to 10 V/div ±100 V ±5 V Horizontal system, analog channel Time base range 1 GHz model 400 ps/div to 1000 s/div ≤ 500 MHz model 1 ns/div to 1000 s/div Maximum duration at the highest sampling rate (full/half channel) 1 GHz model 4/2 ms ≤ 500 MHz model 4/4 ms Time base delay time range -10 divisions to 5000 s Time lag range between channels ±125 ns Time base accuracy ±10 ppm, at any interval ≥1 ms Trigger system Trigger mode automatic, normal and single Trigger coupling DC, AC, high frequency suppression (attenuation >50 kHz), low frequency suppression (attenuation <50 kHz), noise suppression (reduction of sensitivity) Trigger holdoff range 20 ns to 8 s Trigger sensitivity (typical value) edge type, DC coupling Trigger source sensitivity Any analog input channel Suitable for 1 mV/div to 4.98 mV/div; from DC to 50 MHz, it is 0.75 div, and the rated bandwidth is increased to 1.3 div Suitable for ≥ 5 mV/div; 0.40 div from DC to 50 MHz, increased to 1 div at rated bandwidth Auxiliary input (external trigger); only available for dual-channel instruments 200 mV from DC to 50 MHz, up to 500 mV at 200 MHz bandwidth Power frequency fixed Trigger level range Any input channel is ±8 from the center of the screen. If vertical low frequency suppression trigger coupling is selected, it is 0V ±8 grid auxiliary input (external trigger) ±8 V power frequency power frequency trigger level is fixed at about 50% of power frequency voltage. The trigger frequency readout provides a 6-digit frequency readout that can trigger an event. Trigger type Positive slope, negative slope, or any slope on any channel of the edge. Coupling includes DC, AC, high frequency suppression, low frequency suppression and noise suppression. Sequence (B trigger) trigger delay time length: 8 ns to 8 s. Or the number of trigger delay events: 1 to 4,000,000 events. Not available when "any" edge is selected. The pulse width triggers when positive pulse width or negative pulse width >, <, =, ≠ or within/out of the specified time period. Timeout is triggered when the event remains high, low, or any state for a specified period of time (4 ns ~ 8 s). Runt pulse triggers when a pulse crosses a threshold but fails to cross the second threshold before crossing the first threshold again. Logic triggers when any logic mode of the channel becomes false or remains true for a specified period of time. Any input can be used as a clock to find the pattern on the clock edge. The mode specified for all input channels (AND, OR, NAND, NOR) is defined as high, low or don‘t care. The setup time and hold time are triggered when there is a violation of the setup time and hold time between the clock and the digital existing on any analog and digital input channels. Setup time and hold time trigger type Description Settling time range -0.5 ns to 1.024 ms Hold time range 1.0 ns to 1.024 ms The setup + hold time range is 0.5 ns to 2.048 ms. The rise/fall time triggers when the pulse edge change rate is faster or slower than the specified rate. The slope can be positive, negative or either, and the time range is 4.0 ns to 8 s. Video triggers on all lines (parity) or all fields on NTSC, PAL and SECAM video signals. In 480p/60, 576p/50, 720p/30, 720p/50, 720p/60, 875i/60, 1080i/50, 1080i/60, 1080p/24, 1080p/24sF, 1080p/25, 1080p/30, 1080p /50, 1080p/60 As well as custom-made bi-level and tri-level synchronization video standards triggering. Parallel (provided when installing option MDO3MSO) triggers on the parallel bus data value. The size of the parallel bus can be from 1 to 20 bits (from digital and analog channels). Supports binary and hexadecimal bases. Acquisition System Acquisition mode Sampling collects the sampled value. The sampling glitch for all scanning speeds of peak detection is narrow to 1.5 ns (1 GHz model), 2.0 ns (500 MHz model), 3.0 ns (350 MHz model), 5.0 ns (200 MHz model), 7.0 ns (100 MHz model). The average contains 2~512 waveforms on average. Envelope min-max envelope reflects the peak detection data on multiple acquisitions. The number of selectable waveforms for the envelope is 1 to 2000; infinity. High-resolution real-time rectangular averaging can reduce random noise and improve vertical resolution. Scroll scroll the waveform from right to left on the screen, and the scanning speed is lower than or equal to 40 ms/div. FastAcq®FastAcq is optimized for analyzing dynamic signals and capturing occasional events. The 1 GHz model has a capture rate of >280,000 wfms/, and the 100 MHz-500 MHz model has a capture rate of >235,000 wfms/s. Waveform measurement Cursor waveform and screen Automatic measurement (time domain) 30 items, of which up to 4 items can be displayed on the screen at any time. Measurements include: period, frequency, delay, rise time, fall time, positive duty cycle, negative duty cycle, positive pulse width, negative pulse width, burst width, phase, positive overshoot, negative overshoot, total overshoot , Peak-to-peak value, amplitude, high, low, maximum, minimum, average, period average, root mean square, period root mean square, number of positive pulses, number of negative pulses, number of rising edges, number of falling edges , Area and period area. Automatic measurement (frequency domain) 3 items, of which one item can be displayed on the screen at any time. Measurements include: channel power, adjacent channel power ratio (ACPR) and occupied bandwidth (OBW) Measurement statistics mean, minimum, maximum, and standard deviation. Reference level The user-definable reference level is used for automatic measurement and can be specified in percentage or unit form. Gating isolates a specific event in the acquisition and performs a measurement, using the screen or waveform cursor. Waveform histogram The waveform histogram provides a set of data values, which represents the total number of hits within a user-defined area on the display. The waveform histogram is both a visual representation of the hit distribution and an array of numbers that can be measured. Source Channel 1, Channel 2, Channel 3, Channel 4, Reference 1, Reference 2, Reference 3, Reference 4. Math Type Vertical, Horizontal. The waveform histogram measures 12 items, of which up to 4 items can be displayed on the screen at any time. Number of waveforms, hits in the box, peak hits, median, maximum, minimum, peak-to-peak, average, standard deviation, Sigma 1, Sigma 2, Sigma 3. Wave math Add, subtract, multiply and divide arithmetic waveforms. Mathematical function integration, differentiation, FFT. FFT spectrum magnitude. Set the FFT vertical scale to linear RMS or dBV RMS, and set the FFT window to rectangular, Hamming, Hanning, or Blackman-Harris. Spectrum mathematics Add and subtract spectrum traces. Advanced mathematics defines a large number of algebraic expressions, including waveforms, reference waveforms, mathematical functions (FFT, integration, differentiation, logarithm, exponent, square root, absolute value, sine, cosine, tangent, radian, angle), scalar, up to two User adjustable variables and parameterized measurement results (period, frequency, delay, rise, fall, positive width, negative width, burst width, phase, positive duty cycle, negative duty cycle, positive overshoot, negative overshoot , Total overshoot, peak-to-peak value, amplitude, root mean square, period root mean square, high, low, maximum, minimum, average, period average, area, period area and trend graph), for example (Intg(Ch1 -Mean(Ch1)) × 1.414 × VAR1). Event operation Event none, when the trigger occurs, or when a defined number of samples is completed (1 ~ 1,000,000) Operation stop acquisition, save waveform to file, save screen image, print, trigger output pulse, remote interface SRQ, email notification and visual notification Repeat the operation during the repeat event (to 1,000,000, infinity) Video picture mode Source channel 1, channel 2, channel 3, channel 4 Video standard NTSC, PAL Contrast and brightness manual and automatic Field selection odd, even, interleaved Optional X and Y position, width and height adjustment, start line and pixel, and line-to-line offset control for the position of the picture on the screen. Power measurement (optional) Power quality measurement VRMS, V crest factor, frequency, IRMS, I crest factor, effective power, apparent power, reactive power, power factor, phase angle. Switching loss measurement Power loss Ton, Toff, conduction, total loss. Energy loss Ton, Toff, conduction, total loss. Harmonic THD-F, THD-R, RMS measurement. Harmonic graphic display and table display. Measure according to IEC61000-3-2 Class A and MIL-STD-1399 section 300A. Ripple measures V ripple and I ripple. Modulation analysis + pulse width,-pulse width, period, frequency, + duty cycle and-duty cycle modulation type graphical display. Graphic display and template test for safe operation area measurement of switchgear in safe operation area. dV/dt and dI/dt measurement slew rate cursor measurement Limit/mask test (optional) Test source limit test: any of Ch1-Ch4 or any of R1-R4 Mask test: any channel from Ch1-Ch4 Template creation limit test vertical tolerance 0 to 1 division, 1 milli division increment; limit test horizontal tolerance 0 to 500 milli division, 1 milli division increment. Load custom templates from text files of up to 8 paragraphs. The template ratio is locked to the source on (the template will automatically scale the ratio as the source channel setting changes) Lock to the source closed (the template does not scale with the change of the source channel setting) Minimum number of waveforms for test standard running time (from 1 to 1,000,000; infinity) Minimum duration (from 1 second to 48 hours; infinity) Violation threshold from 1 to 1,000,000; infinity Operation when the test fails, stop the acquisition, save the screen image to a file, save the waveform to a file, print the screen image, trigger the output pulse, set the remote interface SRQ Operation when the test is completed, auxiliary output pulse, setting the remote interface SRQ The result shows the test status, the total number of waveforms, the number of violations, the total number of tests, the number of failed tests, the duration, and the total number of hits in each template segment 2-Spectrum Analyzer Capture bandwidth MDO3012, MDO3014 models: 100 MHz MDO3022, MDO3024 models: 200 MHz MDO3032, MDO3034 models: 350 MHz MDO3052, MDO3054 models: 500 MHz MDO3102, MDO3104 models: 1 GHz All models: 3 GHz with MDO3SA option Bandwidth MDO3012, MDO3014 models: 9 kHz – 100 MHz MDO3022, MDO3024 models: 9 kHz – 200 MHz MDO3032, MDO3034 models: 9 kHz – 350 MHz MDO3052, MDO3054 models: 9 kHz – 500 MHz MDO3102, MDO3104 models: 9 kHz – 1 GHz All models: 9 kHz – 3 GHz, with MDO3SA option, adjusted in 1-2-5 sequence Resolution bandwidth 20 Hz-150 MHz, adjust according to 1-2-3-5 sequence Reference level -130 dBm to +20 dBm, step size 5 dBm Vertical scale from 1 dB/div to 20 dB/div, press 1-2-5 sequence to adjust Vertical position -100 divisions to +100 divisions (displayed in dB) Vertical unit dBm, dBmV, dBµV, dBµW, dBmA, dBµA Display average noise level (DANL) 9 kHz-50 kHz< -109 dBm/Hz (< -113 dBm/Hz typical value) 50 kHz-5 MHz< -126 dBm/Hz (< -130 dBm/Hz typical value) 5 MHz-2 GHz< -136 dBm/Hz (< -140 dBm/Hz typical value) 2 GHz – 3 GHz< -126 dBm/Hz (< -130 dBm/Hz typical value) DANL, connect TPA-N-PRE preamplifier, set the preamplifier to "auto", and set the reference level to -40 dB 9 kHz-50 kHz< -117 dBm/Hz (< -121 dBm/Hz typical value) 50 kHz-5 MHz< -136 dBm/Hz (< -140 dBm/Hz typical value) 5 MHz-2 GHz< -146 dBm/Hz (< -150 dBm/Hz typical value) 2 GHz – 3 GHz< -136 dBm/Hz (< -140 dBm/Hz typical value) Spurious response ?Second-order harmonic distortion (>100 MHz) <-55 dBc (< -60 dBc typical value) ?Third-order harmonic distortion (>100 MHz) <-53 dBc (< -58 dBc typical value) ?Modulation distortion (>15 MHz) <-55 dBc (< -60 dBc typical value) ?Third-order intermodulation distortion (>15 MHz) <-55 dBc (< -60 dBc typical value) Remaining response <-78 dBm (≤ -15 dBm reference level, the RF input end is connected to a 50 Ω load) <-67 dBm at 2.5 GHz <-76 dBm at 1.25 GHz Crosstalk of oscilloscope channel to spectrum analyzer ≤800 MHz input frequency <-60 dB, relative to the reference level (typical value) >800 MHz-2 GHz input frequency <-40 dB, relative to the reference level (typical value) Phase noise, 1 GHz CW 10 kHz< -81 dBc/Hz, <-85 dBc/Hz (typical value) 100 kHz< -97 dBc/Hz, <-101 dBc/Hz (typical value) 1 MHz< -118 dBc/Hz, <-122 dBc/Hz (typical value) The level measurement uncertainty reference level is 10 dBm to -15 dBm. The input level ranges from the reference level to 40 dB below the reference level. Technical data does not include mismatch errors. 18 °C-28 °C< ±1.2 dBm (< ±0.6 dBm typical value) the entire working range <±2.0 dBm The uncertainty of level measurement with TPA-N-PRE preamplifier is set to "Auto" and the reference level is set to 10 dBm to -40dBm. The input level ranges from the reference level to 30 dB below the reference level. Technical data does not include mismatch errors. 18 °C-28 °C< ±1.5 dBm (typical value), the entire working range of any preamplification state <±2.3 dBm, any preamplification state Frequency measurement accuracy ± (([reference frequency error] x [mark frequency]) + (bandwidth/750 + 2)) Hz; reference frequency error = 10ppm (10 Hz/MHz) Maximum working input level Average continuous power +20 dBm (0.1 W) maximum DC before damage ±40 V DC maximum power before damage (continuous wave) +33 dBm (2 W) maximum power before damage (pulse) +45 dBm (32 W) (<10 µs pulse width, <1% duty cycle, reference level ≥ +10 dBm) Maximum working input level when TPA-N-PRE is connected Average continuous power +20 dBm (0.1 W) maximum DC before damage ±20 V DC maximum power before damage (continuous wave) +30 dBm (1 W) maximum power before damage (pulse) +45 dBm (32 W) (<10 μs pulse width, <1% duty cycle, reference level ≥ +10 dBm) Frequency domain trace type: normal, average, maximum hold, minimum hold Detection method + peak value,-peak value, average value, sampling value Automatic marking determines 1 to 11 peaks based on user-adjustable threshold and offset values Manually mark two manual marks, indicating frequency, amplitude, noise density and phase noise Mark the absolute or relative value of the reading FFT window FFT window coefficient Kaiser 2.23 Rectangular 0.89 Hamming 1.30 Hanning 1.44 Blackman-Harris 1.90 Flat top 3.77 3-Arbitrary Function Generator (Requires MDO3AFG option) Waveform sine wave, square wave, pulse wave, ramp/triangular wave, DC, noise, sampled signal (Sinc function), Gaussian white noise, Lorentz curve, exponential rise, exponential fall, haversine curve, electrocardiogram and arbitrary waveforms. Sine wave Frequency range 0.1 Hz to 50 MHz Amplitude range 20 mVp-p to 5 Vp-p, high impedance; 10 mVp-p to 2.5 Vp-p, 50 Ω amplitude flatness (typical value) ±0.5 dB at 1 kHz (± 1.5 dB, <20 mVp-p amplitude) total harmonic distortion (typical value) 1%, 50 Ω 2%, amplitude <50 mV and frequency> 10 MHz 3%, frequency <20 mV and frequency> 10 MHz Spurious Free Dynamic Range (SFDR) (typical value) -40 dBc (Vp-p ≥ 0.1 V); -30dBc (Vp-p ≤ 0.1 V), 50 Ω load Square wave/pulse wave Frequency range 0.1 Hz to 25 MHz Amplitude range 20 mVp-p to 5 Vp-p, high impedance; 10 mVp-p to 2.5 Vp-p, 50 Ω duty cycle 10% to 90% or 10 ns minimum pulse, with The larger period is quasi-duty cycle resolution 0.1% minimum pulse width (typical value) 10 ns rise time/fall time (typical value) 5 ns (10%-90%) pulse width resolution 100 ps overshoot (typical value) Value) <2%, signal step greater than 100 mV, asymmetry ±1% ±5 ns, 50% duty cycle jitter (TIE RMS) (typical value) <500 ps Sawtooth/Triangular Wave Frequency range 0.1 Hz to 500 kHz Amplitude range 20 mVp-p to 5 Vp-p, high impedance; 10 mVp-p to 2.5 Vp-p, 50 Ω variable symmetry 0% to 100% symmetry resolution 0.1% Direct current Level range (typical value) ±2.5 V, high impedance; ±1.25 V, 50 Ω noise Amplitude range 20 mVp-p to 5 Vp-p, high impedance; 10 mVp-p to 2.5 Vp-p, 50 Ω amplitude resolution 0% to 100%, in 1% increments Sampled signal (Sinc function) Frequency range (typical value) 0.1 Hz to 2 MHz Amplitude range 20 mVp-p to 3.0 Vp-p, high impedance; 10 mVp-p to 1.5 Vp-p, 50 Ω Gauss Frequency range (typical value) 0.1 Hz to 5 MHz Amplitude range 20 mVp-p to 2.5 Vp-p, high impedance; 10 mVp-p to 1.25 Vp-p, 50 Ω Lorentz Frequency range (typical value) 0.1 Hz to 5 MHz Amplitude range 20 mVp-p to 2.4 Vp-p, high impedance; 10 mVp-p to 1.2 Vp-p, 50 Ω Index up/down Frequency range (typical value) 0.1 Hz to 5 MHz Amplitude range 20 mVp-p to 2.5 Vp-p, high impedance; 10 mVp-p to 1.25 Vp-p, 50 Ω Hassine curve Frequency range (typical value) 0.1 Hz to 5 MHz Amplitude range 20 mVp-p to 2.5 Vp-p, high impedance; 10 mVp-p to 1.25 Vp-p, 50 Ω ECG (typical value) Frequency range 0.1 Hz to 500 kHz Amplitude range 20 mVp-p to 5 Vp-p, high impedance; 10 mVp-p to 2.5 Vp-p, 50 Ω Arbitrary waveform Memory depth 1 to 128 k Amplitude range 20 mVp-p to 5 Vp-p, high impedance; 10 mVp-p to 2.5 Vp-p, 50 Ω repetition rate 0.1 Hz to 25 MHz sampling rate 250 MS/s Frequency accuracy Sine wave and ramp 130 ppm (frequency <10 kHz) 50 ppm (frequency ≥ 10 kHz) Square wave and pulse wave 130 ppm (frequency <10 kHz) 50 ppm (frequency ≥ 10 kHz) Resolution 0.1 Hz or 4 digits, whichever is greater Amplitude accuracy ±[(1.5% peak-to-peak amplitude setting) + (1.5% DC offset setting) + 1 mV] (frequency = 1 kHz) DC bias DC offset range ±2.5 V, high impedance; ±1.25 V, 50 Ω DC offset resolution 1 mV, high impedance; 500 uV, 50 Ω offset accuracy ±[(1.5% of absolute offset voltage setting) + 1 mV]; when deviating from 25 °C, derate 3 mV every 10 °C ArbExpress®MDO3000 is compatible with PC-based waveform creation and editing software ArbExpress. The waveform is captured on the MDO3000 oscilloscope and transferred to ArbExpress for editing. Create complex waveforms on ArbExpress and transfer them to the arbitrary function generator of MDO3000 for output. To download ArbExpress software, please visit www.tektronix.com/downloads. 4-Logic Analyzer (Requires MDO3MSO option) Input channels 16 digital channels (D15 to D0) Threshold Set threshold for each group of 8 channels Threshold selection TTL, CMOS, ECL, PECL, user-defined User-defined threshold range -15 V to +25 V Maximum input voltage -20 V to +30 V Threshold accuracy ±[100 mV + 3% of threshold setting] Input dynamic range 50 Vp-p (depending on threshold setting) Minimum voltage swing 500 mV Input resistance 101 kΩ Probe load 8 pF Vertical resolution 1 bit Horizontal system, digital channel (Requires MDO3MSO option) Maximum sampling rate (master control) 500 MS/s (2 ns resolution) Maximum record length (master control) 10 M Maximum sampling rate (MagniVu) 8.25 GS/s (121.2 ps resolution) Maximum record length (MagniVu) 10k points, centered on the trigger point Minimum detectable pulse bandwidth (typical value) 2 ns Time lag between channels (typical) 500 ps Maximum input switching rate 250 MHz (the maximum frequency sine wave that can be accurately reproduced as a logical square wave. A short ground extension cord is required on each channel. This is the maximum frequency at the minimum swing amplitude. The higher the switching rate, the better The higher the amplitude.) 5-Serial Protocol Analyzer Automatic serial triggering, decoding and search options, support I2C, SPI, RS-232/422/485/UART, USB2.0, CAN, CAN FD (ISO and non-ISO), LIN, FlexRay, MIL-STD-1553, ARINC-429 and audio bus. For more detailed information about serial bus support products, please refer to Serial trigger and analysis application module product technical data. 6-Digital Voltmeter Source channel 1, channel 2, channel 3, channel 4 Measurement type AC effective value, DC, AC+DC effective value (read voltage or current); frequency Resolution ACV, DCV: 4 digits Frequency: 5 digits Frequency accuracy ± (10 µHz/Hz + 1 count) The measurement rate is 100 times/second; the measurement results on the display are updated 4 times/second Vertical setting, auto range automatically adjusts the vertical setting to maximize the dynamic range of the measurement; it can be used for any non-trigger source Graphical measurement of the minimum, maximum, current value and the graphical representation of the 5-second scrolling range Overall product technical indicators Display type 9-inch (229 mm) color display Display resolution 800 horizontal × 480 vertical pixels (WVGA) Interpolation Sin(x)/x Waveform type vector, dot, variable persistence, infinite persistence FastAcq palette color temperature, spectrum, normal, inverted Full scale, grid, solid line, crosshair, frame, IRE and mV Format YT, XY and simultaneous XY/YT Maximum waveform capture rate FastAcq acquisition mode >280,000 wfms/s for 1 GHz models FastAcq acquisition mode >235,000 wfms/s for 100 MHz – 500 MHz models DPO acquisition mode >50,000 wfms/s for all models Input/output port The USB 2.0 high-speed host port supports USB mass storage devices, printers, and keyboards. One port on the front and back of the instrument. The USB 2.0 device port rear panel connector allows communication/control of the oscilloscope via USBTMC or GPIB (using TEK-USB-488) and direct printing to a PictBridge compatible printer. Print to a network printer, PictBridg printer, or a printer that supports e-mail printing. Note: This product includes software developed by OpenSSL for use in the OpenSSL toolkit. (http://www.openssl.org/) LAN port RJ-45 connector, support 10/100 Mb/s Video output port DB-15 female connector, used to display the oscilloscope display on an external monitor or projector. SVGA resolution. Auxiliary input (typical value) (only for dual-channel models) Front panel BNC connector input impedance, 1 MΩ maximum input 300 VRMS CAT III, peak value ≤ ±425 V Probe compensator output voltage and frequency front panel pins Amplitude 0 to 2.5 V frequency 1 kHz Auxiliary output rear panel BNC connector VOUT(Hi): ≥2.25 V open circuit, ≥0.9 V 50 Ω to ground VOUT(Lo): ≤0.7 V to load ≤4 mA, ≤0.25 V 50 Ω to ground The configurable output is used to provide a pulse output signal when the oscilloscope is triggered, and to provide the trigger signal or event output of the internal arbitrary function generator for limit/mask testing. Kensington-type lock The rear panel security slot connects to a standard Kensington-type lock. VESA Mounting There is a standard (MIS-D 75) 75 mm VESA mounting point on the back of the instrument. LAN eXtensions for Instrumentation (LXI) Category LXI Core 2011 Version V1.4 software OpenChoice® Desktop can use USB or LAN to communicate easily and quickly between the Windows PC and the oscilloscope. Transfer and save settings, waveforms, measurements, and screen images. Contains Word and Excel toolbars, which can automatically transfer collected data and screen images from the oscilloscope to Word and Excel for quick reporting or detailed analysis. The IVI driver provides a standard instrument programming interface for common applications (such as LabVIEW, LabWindows/CVI, MicrosoftNET, and MATLAB). The e*Scope® web-based interface allows the oscilloscope to be controlled via a network connection on a standard web browser. Just enter the IP address or network name of the oscilloscope and a web page will be provided to the browser. You can directly transfer and save settings, waveforms, measurement results, and screen images from a web browser, or make real-time control changes to the oscilloscope settings. The LXI Core 2011 web interface only needs to enter the IP address or network name of the oscilloscope in the address bar of the browser to connect to the oscilloscope through a standard web browser. The web interface allows viewing instrument status and configuration, network configuration status and modification, and instrument controls through e*Scope Web-based remote control. All web interactions comply with LXI Core 2011 specification version 1.4. power supply Power supply voltage 100 to 240 V ±10% Power frequency 50 to 60 Hz (100 to 240 V) 400 Hz ±10% (115 V) Maximum power consumption 120 W Physical characteristics physical dimension Height 203.2 mm (8 inches) Width 416.6 mm (16.4 inches) Thickness 147.4 mm (5.8 inches) weight Net weight 4.2 kg (9.2 pounds) shipping 8.6 kg (19 pounds) Rack installation configuration 5U 2 inches (51 mm) of clearance is required on the left and back of the instrument EMC, environment and safety temperature Operating state -10 ºC to +55 ºC (+14 ºF to 131 ºF) Non-operating state -40 ºC to +71 ºC (-40 ºF to 160 ºF) humidity Working state up to +40 ºC, 5% to 90% relative humidity +40 ºC to +55 ºC, 5% to 60% relative humidity Maximum non-operating state +40 ºC, 5% to 90% relative humidity +40 ºC to +55 ºC, 5% to 60% relative humidity +55 ºC to +71 ºC, 5% to 40% relative humidity, non-condensing Altitude Operating 3,000 meters (9,843 feet), non-operating 12,000 meters (39,370 feet) Regulations Electromagnetic Compatibility EC Commission Directive 2004/108/EC Safety UL61010-1:2004, CAN/CSA-C22.2 No. 61010.1: 2004, Low Voltage Directive 2006/95/EC and EN61010-1:2001, IEC 61010- 1:2001, ANSI 61010-1-2004, ISA 82.02.01 Random vibration Non-working state 2.46 GRMS, 5 to 500 Hz, 10 minutes for each axis, 3 axes (30 minutes in total) Working state: 0.31 GRMS, 5-500 Hz, 10 minutes for each axis, 3 axes ( 30 minutes in total) Conforms to IEC60068 2-64 and MIL-PRF-28800 Type 3 standards Shock Working status: 50 G, half sine, 11 ms duration, three shocks per axis in each direction (18 shocks in total) Meets IEC 60068 2-27 and MIL-PRF-28800 Type 3 standards Noise emission Sound power level 32.0 dBA (in line with ISO 9296 standard)
13590213125
Mail
ChatNow